Xhorse Mini Prog WiFi Bluetooth EEPROM and Chip Programmer with Built-in Battery
 

The Xhorse VVDI MINI PROG Solder-Free Programmer is a self-contained programming and re-flashing device that can read and write EEPROM data without soldering, VVDI Prog mini can be used for "Re-Flash" type Key Programming, memory device cloning, and module programming.

VVDI Mini programmer does not require a PC to use it, like other EEPROM programmers on the market and it's compatible with any iOS or Android-based smartphone or tablet through Wifi or Bluetooth.

Mini Prog Burst Points:

• Download Xhorse App and connect to your Mini Prog via Bluetooth or WiFi. Mini Prog allows you to finish works like data reading, writing and editing directly on your smartphone, providing greater convenience when working outside.
• Mini Prog supports PIN status detection and will give notice when poor contact arises, which makes it easy to operate and avoid data loss and damage.
• Portable and Easy to use:
  Professional intelligent programming device, providing a portable chip programming solution A handheld and standalone device for reading and writing data.
  The three different heads can be easily switched to read and write different chips, to meet different requirements
• Store data without relying on a computer:
  For most 8-pin integrated circuits, you can use a compression contact to read and write data.
• No Need to Remove Chip
  No need to remove the chip/solder / cut the wire / lift the pin
  Many models will also be equipped with the corresponding adapter, such as the BMW CAS adapter
• No Need Soldering
  Porsche BCM solderless adapter, Land Rover adapter, etc...
  (These adapter boards are also expected to work with VVDI PROG and VVDI Key Tool Plus).

Xhorse Mini Prog Benifits:

• This new MINI PROG is the result of intelligence and speed to provide users easier programming solutions.
• Does not require a PC to use it. You don't need to carry a computer or other devices anymore when you are working. What you need is only a mobile phone!
• You can do the programming work anywhere, your house, car garage, workshop, office, outdoor, coffee shop, car etc. Just take it anywhere, and make it any time!
• 3 Detect Connectors (Test Heads) Suitable for various Transponders.
• Connect MINI PROG to the Xhorse App via Bluetooth & Wifi.
• Works with series of solderless adapters to read chips easily
• Small Prog Language:
  English, French, Spanish, Portuguese, Chinese
  The language of the rest Besides these five, only the local xhorse dealer can activate the relevant language
  For example: If you need the Russian language, it can only be activated for customer xhorse Russia dealer.

• Portable; Easy to use
• No need to remove chip
• No need soldering
• No need to cut the wire
• No need to lift the pin
• Connect to the APP via WiFi or Bluetooth
• Working Speed: The smart screen on top of the MINI PROG clearly shows the real-time working status.
• Built-in battery: and wireless data transmission, no need for external power supply and U disk for data transmission.

What's the function of the new MINI Prog?

• Solder-free Programming
• EEPROM Reading & Writing
• Dashboard Data Reading & Writing
• Data Editing
• Press Header
• PIN Status Detection
• APP Control
• Cloud Backup

Xhorse Mini Prog User Manual


Multi-module Reading & Writing

IMMO data reading & writing

BMW: BDC/CAS3/CAS3+/CAS4/CAS4+/FEM
BENZ: EIS/EIZ
PORSCHE: BCM
LANDROVER: RFA
VOLVO: CEM/KVM

EEPROM reading & writing

Support reading and writing 24C××, 93C××,95×××, 25××× etc. EEPROM data
Covering 95% of common EEPROM in market

ECU data reading & writing

Support reading & writing DFLASH and PFLASH of BMW, AUDI, VW

Dashboard data reading & writing

Support Honda, Kia, Hyundai etc.

The support list above is displayed only partially and you can refer to the latest version of MINI PROG for the complete list.

Pin Header Reading Chip Directly, Pioneer in Industry


Advantages of VVDI Prog MINI

 
Working Interfaces

You don't need to carry a computer or other devices anymore when working. What you need is only a mobile phone! Download Xhorse application in APP store and find MINI PROG, then start working! We support both IOS and Andriod systems.

The working interfaces are as above. As a common advantage of all Xhorse products, you will be instructed for every step. Each step such as reading or writing can be finished on your phone. What's more, you can directly resort to Xhorse technicians on Xhorse APP if you encounter any problems. We'd be very happy to help!

Ultra-simple operation that adapts to you.

There is no need to remove the chip when reading. All you need is to press the pin header at the appropriate chip and then you can read and write data on Xhorse APP.

Smart Detection

Detect Pin Connection Status with Great Accuracy

Your work, more secure.

MINI Pen Prog supports pin status detection and will give notice when poor contact arises, which makes it easy to operate and avoid data loss and damage.

High-tech made simple

APP Control With No Need to Use Computer Anymore

Download Xhorse APP and connect to your MINI PROG via Bluetooth or WiFi. MINI PROG allows you to finish works like data reading, writing and editing directly on your smartphone, providing greater convenience when working outside.


Cloud Storage, Safer Than Ever

Data can be stored in Local File as well as Cloud to ensure the safety of data, avoiding data loss caused by misconduct.

Artfully Crafted

Sleek Design, Best-in-class Experience

Incredibly Light

Extremely Portable

Extraordinarily Convenient

MINI PROG weighs no more than 0.21kg and it's easy to operate and carry. It offers the perfect blend of form and function, fitting into any work environments.

Specifications

Smart App control
WiFi Bluetooth
Capacity: 2550mAh
Normal working hour: >5H
Standby Time: >5D
Recharging current: 1500mAh

Standard Configuration

DB15 Cable * 1 pc

EEPROM Adapter * 1pc

Pin Headers *3 pcs

Pin Header 1 supports reading DIP8 chip

Pin Header 2 supports reading SOP8 wide-type package chip

Pin Header 3 supports reading SOP8 standard package chip

Optional Solder Adapters for VOLVO (KVM), BMW (CAS3, CAS4), PORSCHE (BCM), LANDROVER (KVM)

BMW Adapters

BMW CAS3/CAS3+, CAS4/CAS4+, FRM, DB15-DB25 adapter(for EWS4 adapter only), D80/35080, ECU interface board kit

PORSCHE IMMO Adapter

Porsche BCM

LANDROVER IMMO Adapter

LANDROVER KVM

VOLVO IMMO Adapters

VOLVO KVM, VOLVO CEM-1, VOLVO CEM-2

MB91F Dashboard Adapter

Honda FIT-H
Honda FIT-L
Hyundai SONATA
KIA K3
KIA K5
ECU Adapter
Remote Renew Adapter
9S12XE cable
MCU cable
DB9 cable
12V+5V power adapter
Pin Header 4

Xhorse XDNP30 ECU Adapter BMW ECU ISN Reading without soldering.

All adapters and cables above are optional and are not included in standard configuration.