EUR
Xhorse VVDI MB Universal Benz FBS3 Keyless Smart Key with 200 Free Points Renewable 433/315MHz
Related Products
-
$ 2,250.00Add To Cart
$ 2250.00
-
$ 1,000.00Add To Cart
$ 1000.00
-
$ 520.00Add To Cart
$ 520.00
-
$ 180.00Add To Cart
$ 180.00
-
$ 1,800.00Add To Cart
$ 1800.00
-
$ 1,000.00Add To Cart
$ 1000.00
compatible with multi Benz key programmers
With free 200 bonus points
PN: XSBZ01EN
Manufacturer: Xhorse
Frequency: 433/315MHz
Condition: New
Buttons: 4
Panic: Yes
This PCB works as a replacement for Mercedes IR Prox Keys in E Class, C Class, S Class, ML Series, and GL Series with the EIS Modules listed below from 2009 to 2015 as long as they are FSB3 Systems and do not have the Push To Start Button on the vehicle's Shift Lever. If the vehicle you are working with has the Push To Start Button on the Shift Lever, there is not currently a replacement Prox Key available for these vehicles.
Features:
- This PCB Supports Manual Starting, Keyless Entry, and PTS (Push To Start) Functions
- The PCB works with FBS3 Systems using these EIS Modules: W204, W207, W212, W164, W166, W221
- 315 Mhz and 433 MHz Frequency Compatibility (Set In VVDI MB Software Or By Component Change)
- A working battery is not required for IR Key Information writing
- Compatible with multi Benz key programmers
- Passive keyless entry keyless go
- With free 200 bonus points (can be exchanged to 1 token )
- Can be renewed
- Support firmware upgrade
Supported models:
C-class W204, W207
E-class W212
R-class W251
S-class W221, W216
CL-W216
CLC-W204
CLE-W207
CLK-W207
GL-X164, X166
GLC-X204
GLE-W164, W166
GLK-X204
ML-W164, W166
VVDI MB Tool Software Update (Support VVDI smart key(FBS3) get bonus points)
Support Passive keyless entry + keyless go
Support Battery-free IR write data: without times limit.
Support Firmware upgrade
Support 433MHZ/315MHZ free switch: set frequency through VVDI-MB or switch over different special resistance.
How to exchange FBS3 smart key frequency between 315MHz and 433MHz?
Method 1:
If you have VVDI MB Tool, it is easy to change frequency in vvdi mb software (update software to latest version)
Select Other Function-> Set key remote frequency/ Update MB smart key
You can set frequency between 315MHz and 433MHz
If without VVDI MB, you can change FBS3 keylessgo smart key frequency manually by soldering / desoldering the FRE resistor (marked red in picture below)
How to collect points and exchange BGA token?
1. Collect points
2. Bond VVDI MB in your Xhorse APP
3. Run APP to scan QR code
Note:
Due to the design flaws of a few OEM shells, pressing the button forcefully may cause a short circuit on the circuit board, resulting in battery leakage.
To avoid this problem, it is recommended to put insulating tape on the area shown in the figure below.
Whatapp:+86 15012919489
