Original Xhorse VVDI PROG Programmer V4.9.2

UK/US/RU Warehouse Fast Shipping NO TAX

VVDI PROG Language: English, French, Italian, Spanish, Arabic, Cezch, Polish, Portuguese, Russian, Turkish, Chinese.

Latest Software Version: V4.9.2
 
TOP 6 Reasons to Get Xhorse VVDI PROG:
   
1. Built-in update software: Make VVDIProg firmware update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed
7.Newly Add BMW Bosch Adapter functions, Support Reading ISN from BMW ECU N20 N55 N38, but need to buy VVDI Prog Bosch ECU Adapter.

VVDI Prog Programmer Introduction:

●VVDI Prog Main Features
●VVDI Prog Cables and Function
●VVDI Prog Supported Chip List
●VVDI Prog Newest Software Update
●VVDI Prog Package List  

Buy VVDI Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service



Where to find the software download link ?



 
These adapters for the vvdi prog, If you want it,you can order 
 
Xhorse VVDI Prog M35080 Adapter
Xhorse VVDI Prog EWS3 Adapter
Xhorse VVDI Prog EEPROM Clip adapter

 
Main Feature:
   
1. The built-in update software allows user to update VVDIProg firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
 

VVDI Prog Cables and Function:
16Pin Locking Socket
Read the common EEPROOM, note: please insert the chip by following the below picture.

1.3.2 MCU Reflash Cable
Used to program MCU on board



1.3.3 ECU Reflash Cable
Used to program ECU

1.3.4  MC9S12 Reflash Cable 
Used to program MC9S12 series chip



VVDI Prog Supported chip list
 

EEPROM

Note: R means the type is supported, £ means the type will be supported soon in the future

MCU

Note: R means the type is supported £ means the type will be supported soon in the future.

 ECU

Note: R means the type is supported £ means the type will be supported soon in the future.

VVDI PROG CHIP LIST





VVDI Prog Update:

VVDI PROG latest software version V4.9.2 update
-------------------------------------
v4.9.2            (2020-03-16)
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.9.2
  version in Doc folder
+ Add STM32F405RG,
  STM32F405OG,
  STM32F405VG,
  STM32F405ZG,
  STM32F405OE,
  STM32F407VE,
  STM32F407ZE,
  STM32F407IE,
  STM32F407IG options in
  <2-MCU>->
+ Add FRM-E-SERIES-XEQ384-READ,
  FRM-E-SERIES-XEQ384-WRITE,
  FRM-F-SERIES-XEP100-READ,
  FRM-F-SERIES-XEP100-WRITE,
  FRM-F-SERIES-XET512-READ,
  FRM-F-SERIES-XET512-WRITE options
  in <8-OTHERS-> 
+ Add ENVISION—TAILGATE-COMPUTER
  options in<8-OTHERS->  
+ Add PHAETON—TAILGATE-COMPUTER(2012)
  options in<8-OTHERS->   

VVDI Prog Latest Software V4.9.1 update: (2020-02-19)

* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.9.1version in Doc folder
+ Add ME17.3.0(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.10(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP54(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C69(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.8.31(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->

+ Add MED17.7.5(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->

+ Add MED17.7.7(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.5(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME 17.8.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP49(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C76(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.12(ADAPTER) options in  <10-BOSH-ECU-ADAPTER>->

+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP52(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME1717.9.20(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C70(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP42(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C58(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C83(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.9(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.8.32(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.8.32(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.3.4(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.8.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.27(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.5.24(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.5.26(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->

VVDI  PROG latest software version V4.9.0 update
-------------------------------------
v4.9.0             (2020-01-15)
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.9.0
  version in Doc folder
+ Add R5F100_Data_8KB_Read_SECURED
  options in 
  <2-MCU>->
+ Add R5F10C/D_Data_8KB_Read_SECURED
  options in 
  <2-MCU>->
+ Add R5F104_Data_8KB_Read_SECURED
  options in 
  <2-MCU>->
+ Add AXELA options 
  in<4-IMMOBILIZER>->    
+ Add LINGZHI-V5(2016) options 
  in<5-DASHBOARD>->  
+ Add TRUMPCHI-GS8(2017) options 
  in<5-DASHBOARD>-> 
+ Add TIGUAN-L options 
  in<7-AIRBAG>->   
+ Add G63-FAS(2019)
  options in<8-OTHER>->
+ Add G63-FAS-SWITCH(2019)
  options in<8-OTHER>->  
+ Add MED17.7.1(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.3(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C66(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C10(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add MED17.0.7(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add EDC17CP47(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add EDC17CP62(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C57(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C58(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.9.3(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->   
+ Add EDC17CP55(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C60(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add EDC17CP42(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add MED17.4.4(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.9.63(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->    
+ Add EDC17C64(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  

VVDI PROG latest software version V4.8.9 update
-------------------------------------
v4.8.9              (2019-12-21)
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.8.9
  version in Doc folder
+ Add HYOSOW-S7 in
  <4-IMMOBILIZER>->
+ Add 820 in
  <4-IMMOBILIZER>->  
+ Add S5 options 
  in<5-DASHBOARD>->   
+ Add CROSS options 
  in<7-AIRBAG>->   
+ Add AUDI-Q5-AMP options 
  in<8-OTHER>->   
+ Add 205-LAMP-RH options 
  in<8-OTHER>->   
+ Add 330-CABRIOLET-MODULE options 
  in<8-OTHER>->    
+ Add F18-FZD options 
  in<8-OTHER>->     
+ Add MED17.7.2(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17.7.2(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17.7.8(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP46(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add EDC17C45(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add EDC17C56(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add EDC17C50_Fxx(ADAPTER)options in
  <10-BOSH-ECU-ADAPTER>->   
+ Add MED17.3.5(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->   
+ Add MED17.9.30(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->   
+ Add EDC17CP50(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add MED17.8.3(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->    
+ Add MEVD17.4.4(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>-> 
+ Add ME17.1.6(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->

VVDI PROG latest software V4.8.8 update
-------------------------------------
v4.8.8          (2019-11-12)
* This version DON't need update
  firmware
* Fix ME17.5.22(ADAPTER) READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.8
  version in Doc folder
+ Add STM32F407VG,
  STM32F407ZG options in
  <2-MCU>->
+ Add CAS4-1L15Y-CERAMICS-NO-NEED-
  REMOVE-COMPONENTS,
  CAS4-1L15Y-METAL-NO-NEED-REMOVE-
  COMPONENTS PICTURE in
  <4-IMMOBILIZER>->->
 
+ Add CAS4-5M48H-CERAMICS-NO-NEED-
  REMOVE-COMPONENTS,
  CAS4-5M48H-METAL-NO-NEED-REMOVE-
  COMPONENTS PICTURE in
  <4-IMMOBILIZER>->->
   
+ Add CAS4-5M48H-CERAMICS-NO-NEED-
  REMOVE-COMPONENTS,
  CAS4-5M48H-METAL-NO-NEED-REMOVE-
  COMPONENTS PICTURE in
  <4-IMMOBILIZER>->->
   
+ Add CAS4-5M48H-CERAMICS-NO-NEED-
  REMOVE-COMPONENTS,
  CAS4-5M48H-METAL-NO-NEED-REMOVE-
  COMPONENTS PICTURE in
  <4-IMMOBILIZER>->->
   
+ Add CAS4-5M48H-CERAMICS-NO-NEED-
  REMOVE-COMPONENTS,
  CAS4-5M48H-METAL-NO-NEED-REMOVE-
  COMPONENTS PICTURE in
  <4-IMMOBILIZER>->->
   
+ Add CAS4-5M48H-CERAMICS-NO-NEED-
  REMOVE-COMPONENTS,
  CAS4-5M48H-METAL-NO-NEED-REMOVE-
  COMPONENTS PICTURE in
  <4-IMMOBILIZER>->->
   
+ Add MED17.1.62(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP57(ADAPTER),
  ME17.8.32(ADAPTER),
  MED17.7.2(ADAPTER),
  MED17.7.3.1(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21.1(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add  MED17.7.2(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->  
+ Add ME17.9.21.1(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.52(ADAPTER),
  EDC17C54(ADAPTER),
  EDC17C74(ADAPTER),
  EDC17CP44(ADAPTER),
  ME17.1.1(ADAPTER),
  MED17.1.1(ADAPTER),
  MED17.1.6(ADAPTER),
  MED17.1.21(ADAPTER),
  MED17.1.61(ADAPTER),
  MED17.5.21(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
+ Add TOYOTA_ME17.9.52(ADAPTER)  
  options in
  <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP48(ADAPTER),
  EDC


VVDI PROG latest software V4.8.7 update
-------------------------------------
v4.8.7              (2019-9-19)
* This version DON't need update firmware
* Fix BOSH ECU ADAPTER READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.7
version in Doc folder
+ Add R7F701062, R7F701064 ,R7F701067 
options in<2-MCU>->
+ Add SCENIC(2007) options in<4-IMMOBILIZER>->    
+ Add E3 options   in<5-DASHBOARD>->  
+ Add TIGGO5(2014) options in<5-DASHBOARD>-> 
+ Add 300(2005) options in<5-DASHBOARD>->  
+ Add SOUTHEAST-DX3(2016) options in<5-DASHBOARD>->     
+ Add FRM-SRS options in<8-OTHER>->  

VVDI PROG latest software version 4.8.6 update
-------------------------------------
v4.8.6              (2019-9-02)
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.8.6
  version in Doc folder
+ Add ME17.5.22(TC1724)(ADAPTER),
  MEVD17.2.4_Exx(N20)(ADAPTER),
  MEVD17.2.4_Exx(N20)(ADAPTER),
  MEVD17.2.4_Fxx(N20)(ADAPTER),
  MEVD17.2.9_Fxx(N20)(ADAPTER),
  MEVD17.2.9_Exx(N20)(ADAPTER),
  MED17.5.25(TC1782)(ADAPTER),
  MED17_5_22(TC1782)(ADAPTER),
  MEVD17_2_3(B38)(ADAPTER),
  MEVD17_2_K(B38)(ADAPTER),
  MEVD17.2.5(ADAPTER),
  MEVD17.2.8(ADAPTER),
  MEVD17.2.H(ADAPTER),
  MEVD17.2.P_Fxx(N20)(ADAPTER),
  MEVD17.2_Fxx(N55)(ADAPTER),
  MEVD17.2.G(N55)(ADAPTER),
  MEVD17.2.6(N55)(ADAPTER)
  options in
  <10-BOSH-ECU-ADAPTER>->
  (Need BOSH ECU ADAPTER)
+ Add ME17.5.22(ADAPTER),
  MED17_5_25(ADAPTER) options in
  <10-BOSH-ECU-ADAPTER>->
  (Need BOSH ECU ADAPTER)